The core difference between turning and milling compound and turning center compound
1. Difference in the degree of functional integration of
Youdaoplaceholder0 Turning and milling compound : Based on turning, it integrates multiple processes such as milling, drilling, and tapping, and can even achieve five-axis linkage processing (such as surface milling). Typical scenarios: One-stop processing of aero engine blades and complex shaft parts.
Youdaoplaceholder0 turning center compound : It expands the power tool holder or simple milling function on the basis of turning, but is usually limited to three-axis linkage, and the processing complexity is relatively low. Typical scenarios: Hole system processing of rotating parts such as flanges and valves.
2. Youdaoplaceholder0 Structure and design focus
Youdaoplaceholder0 Turning and milling compound : It adopts a high-rigidity bed and a dual-spindle/dual-tool turret design, supporting multi-task parallel processing (such as turning at one end and milling at the other end).
Youdaoplaceholder0 turning center compound : With the turning spindle as the core, compound processing is achieved by adding a power tool turret or B-axis, making the structure more compact.
3. Youdaoplaceholder0 Application scenarios and costs
Youdaoplaceholder0 turning and milling compound : suitable for single-piece, small-batch, high-precision complex parts (such as medical implants). The equipment cost is high but it reduces the number of clamping times, and the overall efficiency is increased by 30%-50%.
Youdaoplaceholder0 turning center compound : suitable for large quantities of standardized parts (such as automotive drive shafts), with relatively low equipment cost, but requires multiple clamping to complete all processes.
If complex curved surfaces or irregular parts need to be processed, turning and milling compound should be given priority. If the processing of the rotary body hole system mainly focuses on , the turning center has a higher composite cost performance.
Further discussion can be made: What specific type of parts do you process? Or what kind of process parameters are needed?
Service
Mobile website